HST Series Accessories

HST Output Extension Cable
Specifications
Part Number: HSTEXTCBL

FEATURES:

• The heavy duty coiled extension cable is designed to be connected with standard HST remote temperature output and the standard connection cable HST-A5-CBL. The combined length of these cables is approx. 27.5' (8.3m)
• Allows for monitoring of temperature at heights and greater troubleshooting capabilities

• Retracted Length: approx. 64" (1.6m)
• Working length: approx. 23' (7m)
• Rubber strap at male connector end fastens to inspection pole to prevent cable from pulling on connectors and prevents cable from falling should it become disconnected while in use. Do not use if rubber strap is not in place and properly fastened.

MATERIALS:

• The cable is 2 conductor, 0.18” diameter – coil O.D. is 5/8"
• The HST double pin cable connectors on each end are UL recognized black Nylon

ELECTRICAL / MECHANICAL:

• Durability – minimum 300 cycles without mechanical or electrical failure
• Voltage – Maximum 24vdc @ 1.0 amps
• Weight: 8.5oz

ENVIRONMENTAL:

• Temperature- -55°C to +55°C (-67°F to +131°F)

IMPORTANT DIRECTIONS ON SAFE USAGE

When using with extension poles, the cable must be fastened to the inspection pole using the rubber strap provided. The purpose of this is to provide strain relief on the connectors and to prevent the cable from falling on the user should the connection to the HST become disconnected. Make sure that cable does not touch hot surface, moving equipment, or any other dangerous surface.

See following picture for clarification on proper attachment.

Picture 1: Fasten the axial cable lead to the pole using the rubber strap provided. Note that the actual cable has longer axial lead than pictured to provide for swivel movement of test head

DO NOT USE CABLE WITHOUT SECURING CABLE TO POLE USING RUBBER STRAP